Quantcast
Channel: Data Protection Manager - Exchange protection forum
Viewing all 442 articles
Browse latest View live

Can't select copy to network folder

$
0
0

I have Exchange 2010 database backup on DPM 2012.

I would like to recover database to a network folder.
But I can't select this option. Only option available is recovery to original Exchange server.

Thanks for help in advance!


DPM2010 exchange 2010 DAG- showing only one DAG member

$
0
0

i am doing exchange 2010 DAG databases backup with DPM2010

dag have 2members (mbx01,02), 5 databases (each have active and pasive copies).

In DPM selection for 3 databases i can choose between both dag members, but for 2 databases i can only

select database on one mailbox server (mbx02).

anyone had this situation?

Can DPM 2010 backup Exchange 2013

$
0
0

Hello,

We used DPM 2010, and we installed Exchange 2013 and we need to backup it by DPM 2010, we can't upgrade to DPM 2012 now, Can we do that or not by DPM 2010.

If not supported, would there be future rollups or service packs that would enable this functionality in DPM 2010?

Thanks,



Item Level Recover of User Mailbox

$
0
0

We are trying to test restoring one user mailbox or even one mail item from Exchange Mailbox backup.  We can browse through each Exchange Mailbox within DPM 2012. Each user mailbox is displayed in the right pane, when I double click on a user to recover the screen jumps to the top username/mailbox. This feels like a bug or UI issue on DPM.  If I right click on the user and click recover, point it to a share on a test machine it restores the entire mail store database edb file. 


Error ID 31209: Error creating Recovery Point

$
0
0

Hello to all!

I'm puzzling over a problem that I am facing with DPM 2010.

My DPM is configured to backup my databases exchange server 2010 sp1 it is in DAG.

I'm assuming a critical environment and possess little knowledge on the tool. When checking these bases Protection Group, found that a basic critique was not backed up, unfortunately I discovered this when I needed to restore a mailbox that base.

Well, frustrations aside, I want to avoid the same in future. Include this database in Protection Group, and after completing the process of inclusion, based on question (MBX09DB03) got the status: REPLICA CREATION IN PROGRESS as picture below:

Well, after the creation of the replica, it was OK with status as the other in the figure above. So I tried to start the backup process FULL of it (of course). Right clicked on that foundation and clicked CREATE RECOVERY POINT. I selected the option "... EXPRESS FULL BACKUP" appears the error message below:

The question that I leave is: what is missing for me to successfully perform this backup?

Thanks in advance for the help of the community.


Albert Alberico dos Santos

Backup 2 Exchange Server in two domain with one DPM 2012 Server ?

$
0
0

Hi all,

I have Exchange Server 2010 on Domain01.com, and Exchange Server 2013 on Domain02.com.

But I have only one DPM Server 2012 on Domain01.com.

I can add both exchange server to DPM Agent, but the files eseutil.exe and ese.dll seem not the same on Exchange 2010 and Exchange 2013 so I can not backup at the same time.

Is it possible to have a way to backup without install another one DPM server ?

DPM Tape Backup

$
0
0

Hi,

I am taking backup in tape drive of my exchange 2010 mail boxes through DPM 2012. I have some questions;

  1. My backup data base size is 1.1 TB. I have tape drive having capacity of 1.6 TB. i have define retention period for tape drive is 3 week with daily backup.My question is , Is this tape drive is enough capacity to hold three weeks data backup?
  2. Is there any notification or indication in DPM when my tape drive will be full or require another one to proceed.
  3. I want to take backup with following;
  •     One week backup in one tape drive and will be used this tape drive after a month.
  •     Monthly backup in every end of month.

Kindly guide me.

Exchange 2010 Mailbox Recovery not possible

$
0
0

Hi

I am trying to recover a mailbox from DPM 2010. Restoring the entire Exchange database works fine, but i'm unable to select a mailbox in DPM. If I double-click the mailbox database in the browse tab, nothing happens. If I search for a mailbox I get no result.

What am I doing wrong? In the event log I can find no errors or warnings.

My setup:

- DPM server is in domain1, Exchange in domain2, no trust. I configured the agent with setdpmserver.exe. Backup and restore of entire database works fine.

Thank you for your help!


DPM 2012 SP1 - Protecting Exchange 2010 and Exchange 2013 at the same time

$
0
0

Hi,

From which Exchange Server am I commited to copy the ESEUTIL.exe and ESE.dll to the DPM Directory for protecting the whole Exchange databases from both products (2010 and 2013) ?

Thanks for replies.

Regards

Phil


HOW TO BACKUP EXCHANGE SERVER 2012 USING DPM 2012

$
0
0

Good day.

I am a rookie at DPM 2012 SP1 and I have been assigned a task to backup exchange 2012.

Our environment is as follows:

- One DPM 2012 SP1 vm.

- Exchange : - MBX1 vm

     - MBX2 vm

     - CAS1 vm

     - CAS2 vm

- One DAG vm

What I have done so far:

1. Exchange is running perfectly with CU2 updated.

2. I installed WSB(Windows Server Backup) feature and DPM agents on MBX1, MBX2, CAS1 and CAS2.

3. Started the following services on MBX1, MBX2, CAS1 and CAS2; - DPMRA

 - VSS

4. Copied the ese.dll and eseutill.exe from MBX1 to DPM 2012 SP1 server 

5. Created a protection group for exchange.

Problem:

1. The mailbox1 database on MBX1 and MBX2 is refusing to be consistent when i run the consistency check.

So i can not even create  a recovery point. My Boss is grilling me at the moment. Please help a brother out.



 

exchnage 2010 backup fails with eseutil check

$
0
0

hello,

i am running exchange 2010 backup with DPM2010. Backup fails every time when eseutil check option is turned on.

error is: DPM encoured an error while performing an operation fro :f:/db1/logs (ID: 2033 Details: The system cannot find the path specified (0x80070003))

Without eseutil, backup is succesufull. I copied ese.dll and eseutil.exe from exchnage server, so there is no version mismatch.

I created new, clean database, result is the same. But, when i check DB with eseutil /g or eseutil /k, database and logs are ok.

is this some kind of DPM issue?

Not able to see all recoverable items in Exchange 2013 DAG snapshot

$
0
0

Hi,

I have a brand new installation of DPM 2012 SP1 backing up a Exchange 2013 DAG. We only backup the passive databases.
When I click the recovery tab I only see a couple of mailboxes in the recoverable items though 
the database contains about 200 mailboxes.

What have I missed?

BR

Johan Kropp


Exchange 2013 Mailboxes not shown in DPM 2012 SP1

$
0
0

Hello,

when trying to restore an Exchange 2013 Mailbox with DPM 2012 SP1 only the Administrator and the Health Mailboxes are shown in DPM.

Other mailboxes does not appear in the search.

After finding an other Post, that the "Authenticated User" needs OU Read Access to "Read Exchange Information", but the problem is, that the AD is configured for provisioning and the "Authenticated User" cant be added to the OU´s for read Access.

My Question is now: Are there other DPM Users or Groups which can be added to the Organizational Unit, so that the Mailboxes are visible in the DPM Console for restore ?

Many thanks and greetings from germany,

Daniel Betz

Fail Recovery Point Creation of Exchange Database when DPM is doing Recovery Point of Hyper-V Exchange VM.

$
0
0

Hi,

The Recovery Point Creation of Exchange Database fail when DPM is doing Recovery Point of Hyper-V Exchange VM.

Affected area:Accelera Mailbox Database
Occurred since:09/11/2013 01:04:37
Description:Recovery point creation jobs for Exchange Mailbox Database Accelera Mailbox Database on HEFESTO.int.accelera.com.br have been failing. The number of failed recovery point creation jobs = 21.
 If the data source protected has some dependent data sources (like a SharePoint Farm), then click on the Error Details to view the list of dependent data sources for which recovery point creation failed. (ID 3114)
DPM has detected a discontinuity in the log chain for Exchange Mailbox Database Accelera Mailbox Database on HEFESTO.int.accelera.com.br since the last synchronization. (ID 30216 Details: Unspecified error (0x80004005))
More information
Recommended action:
1. Consult the administrator of the Exchange server to rectify the problem. Please ensure that Exchange circular logging is turned off. Synchronization jobs may continue to fail until this issue is resolved.
2. Last backup might have failed after log truncation. 

In the Protection task area, click 'Create recovery point' and select 'Full backup' option.
3. If the protected datasource is an Exchange 2010 database, make sure that multiple copies of the database are not protected for FULL backup. DPM supports protecting only one copy of the database using FULL backup and the other copies have to be protected using COPY backup.
Create a recovery point...
Resolution:To dismiss the alert, click below
Inactivate

Thanks


Diego Riera | Linkedin |Twitter | diegoriera.wordpress.com

Por favor, lembre-se de clicar em "Marcar como Resposta" no post que o ajuda, e clique em "Desmarcar como resposta" se um post marcado na verdade não responder a sua pergunta. Isto pode ser benéfico para outros membros da comunidade. Esta postagem é fornecida, sem garantias e sem direitos.

Change maximal parallel backups (Exchange)

$
0
0

We have one DPM 2012 SP1 (CU3) Server, more than 4 Exchange Server (2010) with a lot of Exchange Mailbox DBs and one Protection Group for the Exchange Backups.

Is it possible, to change the max. allowed parallel backups (for Exchange Mailbox DBs)?
(Express-Full and Synchronisation)

I only found one registry key, but it´s for backup Hyper-V guests.
HKLM\SOFTWARE\Microsoft\Microsoft Data Protection Manager\2.0\Configuration



Problems With backup Exchange 2010 databases

$
0
0

Hi I'm having a problem with backing up our exchange databases through DPM.

Currently when our databases are being backup we will receive one the following error messages in DPM.

"Data consistency verification check failed for <DatabaseName>.edb of Exchange Mailbox Database <DatabaseName> on <MailServername>. (ID 30146 Details: Unknown error(0xfffffb4a) (0xFFFFFB4A)"

OR

"Data consistency verification check failed for LOGS of Exchange Mailbox Database <DatabaseName> on <MailServername>. (ID 30146 Details: Unknown error(0xfffffe0b) (0xFFFFFE0B)"

Now DPM advised I need to check the version's of eseutil.exe and ese.dll what I have done to make sure they are correct on the DPM server and match what is on the Exchange server. This hasn't seemed to have fix the problem.

I can get the databases to backup and truncate there logs if I change the eseutil options within the protection group to not run Eseutil to check data integrity" but this isn't a solution to my problem.

Can anyone help??

Thanks

 

Windows 7 Update cannotstart after clone...

$
0
0
I did more than one clone. The same thing happens each time. Windows update cannot be started..
I tried Automatic Trouble Shooter twice. It failed...failed displaying 2 red 'x's.
I am not that informed about computer trouble shooting. I have no idea regarding next alternate steps.
I thought to try and download the Windows update Agent...haven't got that far. Frustration got the best of me.
I am using HP Pavilion...Windows 7 Home Premium 64 bit. The clone is the same size as the original hard drive...750GB.
The original hard drive is a Seagate...replacement drive is Western Digital. I also tried it with a 1TB Seagate...same problem.
I've come to the end of my understanding.
I will appreciate anyone's help with the solving of this problem. I am totally frustrating.
I hope not to discover more unseen or unknown problems later.
Ask me any questions for further insights...
With much appreciation for your help...sincerely...101ron

Exchange DAG and Data Protection Manager.

$
0
0

Good afternoon.

I have a few questions regarding protection of an Exchange 2010 DAG setup (two servers) with DPM 2012. 

1)  Am I correct that the passive server should be full protected, and the active server copy protected?

2)  We are in an environment where the active and passive Exchange server is changed often (we are working on those issues).  Am I right that DPM does not know when the switch is done, and I will have to manually change the protection for each server to full or copy (depending on who becomes active or passive)?

I believe that is it for now, thank you for your assistance.

Exchange reboots after consistency check

$
0
0

Hi,

We are protecting Exchange 2013 with dpm 2012 SP1. Strange thing is that exchange restarts every time when i run consistency check. I dont realy know what to do? I never have problem like this. Is there a problem with dpmra service or something else? 

DPM 2012 R2 and Exchange 2013 Archive Database Backup

$
0
0

Hello,

I am having a problem backing up two mailbox databases that host our user's archive database.

Type: Replica creation
Status: Failed
Description: DPM encountered a retryable VSS error. (ID 30112 Details: VssError:The writer's timeout expired between the Freeze and Thaw events.
 (0x800423F2))
 More information
End time: 11/25/2013 11:22:37 AM
Start time: 11/25/2013 11:17:00 AM
Time elapsed: 00:05:37
Data transferred: 0 MB
Cluster node -
Source details: EXArchive-2
Protection group: Exchange 2013 Archive Mailbox Database Protection

We are using a phyiscal DPM Server with DAS in RAID 50.  Exchange is hosted in a Hyper V Cluster 2012 with the databases mounted on CSV volumes in a Fixed VHD. 

The backup job runs for about 5 min then gives this error when trying to create the first replica. 

Not sure where to look to try and fix this error, when running the vssadmin command on the DPM server to see if there are any failed VSS writers, everything looks clean.

Thanks

Viewing all 442 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>